Blog

How I keep my paper flat

Maple Sap Road, 7 x 10", watercolour
Maple Sap Road, 7 x 10", watercolour

I paint on paper.  But even though watercolour paper is tough, it gets soggy when it gets wet.  (Unless using very heavy paper, and even that gets a bit limp)  So one needs something to support the paper while painting.  And something to hold the paper flat while it dries.  Like every other technique in the art world, you can find many different people with different opinions.  Here is what works for me.  

I have come to this through trial and error.  I have tried almost every system that I have encountered.   When a paper support fails, the paper warps when it dries and then warps again when I paint on it some more.  And then the paper dries with ripples and will not lie flat in a frame.  Paintings that do not lie flat once finished look terrible in a frame.  

I have tried the classic brown paper tape (the stuff you have to moisten with water to make it sticky) stuck to the paper and the board.  Didn't work.  I tried thumbtacks, nails through thin strips of wood, glue, staples.  None were efficient, and often failed, leaving me with buckled paintings.  Once I ripped a painting trying to get the blasted staples out! 

Here is what works for me:

You will need something to support and hold your paintings flat while you are working on them. I use plywood boards that are an inch larger than the paper I am working on (So for 7 x 10” my board is 8 x 11.5” or so) Mine are made of 1/4” plywood that I have coated with three or more coats of varathane. This makes them pretty much waterproof and prevents the acids in the board from migrating into my wet paper as it lies on the paper. Email me if you want more info on how to make these.

Foam core will work instead if it is thick enough. 1/4” thick is too thin, it will really warp when it gets wet as we paint all day. Then it will not prevent your paper from buckling.  Dan Earle emailed me tonight with the brilliant idea of using plastic cutting boards from the dollar store.  I have not tried that personally but I think that it should work, and will certainly try it eventually.

If you, like me, have old acrylic paintings on masonite that you do not like but cannot bear to part with, you can use these as well. Do cut them to fit your paper.

I use binder clips to hold my paper to the boards, and I leave the painting in place as it dries. This way it dries flat.

 Here are pictures:

This shows a 8 x 12" board without paper, and two smaller ones with 5 x 7" paintings held on with 4 clips each.  For the small 5x 7 paintings I can get away with 4 clips but for a larger one I use a lot of clips.  In the photo below the painting is 11 x 15".  I have the clips spaced one every inch or closer.  To make a painting that size stay flat, I start by soaking the paper in clean water (after putting my drawing on it) and then I lay it on the board, still wet.  I might start painting right away, or not.  If I am not going to paint right away I put the clips on and let it dry.  If starting right away to paint, I paint for a while before putting on the clips.   The act of painting will keep the paper wet, and sometimes the clips will get in the way.  As soon as I notice the paper beginning to dry, though, I put on all the clips.  Then I let it dry and it will stay flat.  

Incidentally the upper painting shows the paints that I use most often, but that is for another post.

Was this interesting to you?  Helpful?  Tell me what you think.

If you like what you read here, please feel welcome to sign up for my email newsletter .  You will get images of my recent paintings and my thoughts about them conveniently delivered right to your email inbox.


Comments

1 Response to How I keep my paper flat

Hi Poppy,
Your bog is very helpful. That brown paper tape I tried using also and just thought I was using it wrong. So now I know, it doesn't work.I like the tip on using a plastic cutting board from Dollarama,"my favorite store".


Leave a Comment

Remember Your Info
Check this box if you want email updates when people comment on this post